Used fly ash bricks machine price in pakistan

1. Introduction to Fly Ash Brick Machines

Fly ash brick machines are specially designed to manufacture bricks using fly ash, cement, sand, and water. These bricks are widely used in the construction of buildings, boundary walls, pavements, and more. Compared to traditional clay bricks, fly ash bricks offer better durability, uniformity, and eco-friendliness.

Silver Steel Mills manufactures both new and reconditioned (used) fly ash brick machines, and their models like SSM 15, SSM 18, SSM 24, SSM 35, and SSM 50 are known for long-lasting performance, even when purchased as used equipment.

2. What Is the Price of Used Fly Ash Bricks Machine in Pakistan?

The price of used fly ash bricks machines in Pakistan can vary depending on multiple factors, such as:

• Machine Model and Capacity
• Age and Condition of the Machine
• Production Output (Bricks per hour)
• Automation Level (Manual, Semi-Automatic, or Fully Automatic)
• Brand and Reputation

Estimated Price Ranges for Used Machines (in PKR):

Note: These are market estimates. Prices may vary based on seller, location, demand, and availability.

3. Why Buy a Used Fly Ash Brick Machine?

Investing in a used fly ash bricks machine in Pakistan is often the smart choice for startups or businesses looking to expand at lower capital investment.

Key Benefits:

• Lower Initial Investment: Used machines cost significantly less than new models, making it easier for small businesses to enter the industry.
• Faster ROI: Reduced upfront cost means quicker return on investment, especially in high-demand regions.
• Tested Performance: Machines that have already been used and maintained properly offer reliable performance.
• Availability of Spare Parts: Models like those from Silver Steel Mills have spare parts readily available, even for older units.
• Sustainable Manufacturing: Reusing machines contributes to sustainable industrial practices by reducing waste.

4. Key Factors to Consider Before Buying Used Fly Ash Brick Machines

To make a wise purchase, ensure you evaluate the following:

a. Machine Condition

Inspect the frame, motors, hydraulic system, control panel, and wear parts like molds and belts. Look for signs of excessive rust, leaks, or motor issues.

b. Production Capacity

Choose a machine that aligns with your daily production goals. If you need 10,000 bricks per day, SSM 24 or higher is ideal, even when used.

c. Seller Reputation

Always purchase from a verified seller, preferably from Silver Steel Mills’ certified resellers, who test and refurbish machines before resale.

d. Availability of Technical Support

Ensure the seller or manufacturer offers support for installation, maintenance, and spare parts.

e. Warranty and Documentation

Request proper documentation, usage history, and if possible, a limited warranty on the used equipment.

5. Silver Steel Mills – A Trusted Name in New and Used Fly Ash Brick Machines

Whether you’re looking for brand-new or used fly ash bricks machines, Silver Steel Mills stands out as a leading manufacturer in Pakistan. Here’s why:

• Durable Machine Structure: Even after years of use, SSM machines maintain high performance and structural integrity.
• Upgradable Components: Used machines can be fitted with upgraded hydraulic and electrical components for better output.
• Easy Maintenance: SSM machines are built with accessible components for cleaning, mold replacement, and servicing.
• Nationwide Network: With service centers across Pakistan, SSM supports both new and used equipment users with spare parts and technician visits.
• Affordable Packages: Silver Steel Mills offers used machines at discounted prices, including installation and initial training.

6. SEO Keywords to Target

If you’re a reseller, manufacturer, or dealer of used fly ash bricks machines, here are the top-performing SEO keywords to use in your website content, blog posts, and digital ads:

• Used fly ash bricks machine price in Pakistan
• Second-hand fly ash brick machine for sale
• Fly ash bricks machine for sale in Lahore/Karachi
• Low price fly ash brick making machine Pakistan
• Silver Steel used block machine
• Buy used concrete block machine in Pakistan
• Affordable fly ash brick plant machinery
• Used SSM brick machine for sale
• Refurbished block making machine Pakistan

Including these keywords naturally in your website, blog, and product listings will help improve your Google ranking and attract more organic leads.

7. Is It Worth Buying Used SSM Models?

Yes. Used SSM models like SSM 18, SSM 24, and SSM 35 offer exceptional value because:

• They’re built with industrial-grade steel that doesn’t deform easily.
• Even in used condition, they can produce 10,000 to 30,000 bricks/day depending on the model.
• Machines retain 50–70% of their original value, making them ideal for resale or trade-in in the future.
• SSM machines are modular, so you can upgrade motors, hydraulics, or molds individually.

8. Where to Find Used Fly Ash Brick Machines in Pakistan

Some reliable sources include:

• Silver Steel Mills Official Website
• Authorized SSM Dealers (many offer certified refurbished machines)
• OLX Pakistan (search with filters for verified sellers)
• Construction Equipment Dealers in Lahore, Karachi, Islamabad
• Facebook Marketplace and Industry Groups
• Trade Shows and Machinery Exhibitions (where used units are often offered at huge discounts)

9. Installation and After-Sale Support

Even for used machines, Silver Steel Mills offers:

• On-site installation
• Operator training
• User manual and maintenance guide
• Annual maintenance contracts (optional)
• 24/7 Technical support via WhatsApp and call center

This kind of after-sale service is rarely offered with used equipment in Pakistan, making SSM machines the best choice.

10. Final Thoughts

Purchasing a used fly ash bricks machine in Pakistan can be a highly profitable decision if done right. Whether you’re launching a new venture or scaling your existing operation, models like SSM 15 to SSM 50 offer reliable performance, even as pre-owned units.

By choosing Silver Steel Mills, you’re not just investing in a machine—you’re investing in a brand that ensures value, service, and long-term profitability.

Profit Margins and Return on Investment from Used Fly Ash Brick Machines in Pakistan

One of the most appealing aspects of investing in a used fly ash bricks machine in Pakistan is the high-profit potential combined with low startup costs. Whether you’re a small investor, a builder expanding operations, or a factory owner looking to diversify, used machines — especially from trusted manufacturers like Silver Steel Mills (SSM) — can provide remarkable ROI.

Let’s break this down step by step.

1. Capital Investment for Used Fly Ash Brick Setup

Setting up a complete used fly ash brick production unit in Pakistan can be much more cost-effective than investing in a brand-new plant. Here’s a sample cost breakdown for a small to medium-capacity setup:

Sample Capital Breakdown (For a Used SSM-24 Model):

Total Estimated Investment: Approx. PKR 3.8 million to PKR 5.3 million for a full unit.

This is significantly lower than the cost of a new fully-automatic plant, which can go beyond PKR 10 million.

2. Production Output and Daily Income

Let’s calculate the daily production and income using a used SSM-24 automatic machine:

• Production Capacity: 8,000 to 12,000 bricks per day
• Cost per Brick (material + labor): PKR 5 to 6
• Selling Price per Brick (market): PKR 10 to 12

Daily Profit Calculation:

Even if you reduce these estimates by 30% for initial inefficiencies, a daily net profit of PKR 30,000–40,000 is achievable.

3. Monthly & Annual Profit Potential

Assuming 25 working days per month, the profit scales up significantly:

This clearly demonstrates why more construction businesses are adopting fly ash brick manufacturing, even with used machinery.

4. Break-Even Timeline

If your initial investment is PKR 4.5 million, and you’re earning about PKR 800,000 per month, you can recover your full capital within:

• 6 to 8 months on average.

This is far better than most industrial businesses, which usually require 2–3 years for full ROI.

5. Factors That Affect Profitability

Here are some key factors that will influence your actual profits:

• Material Cost Fluctuation (cement and fly ash)
• Market Demand & Seasonal Construction Cycles
• Location and Transportation Costs
• Machine Downtime or Maintenance
• Availability of Skilled Labor
• Brand Value (SSM = higher resale value)

Choosing a reliable used machine from Silver Steel Mills gives you an edge because of reduced breakdown risks and better support, even in used models.

6. Enhancing Profitability – Pro Tips

• Mix Design Optimization: Use additives to reduce cement consumption without compromising strength.
• Mold Versatility: Get additional molds (like hollow blocks, curb stones, and pavers) to offer multiple product types.
• Sell Direct to Contractors: Avoid middlemen to increase profit per brick.
• Add Value Through Curing Chambers: Machines with steam/heat curing options can deliver bricks faster.
• Use Solar Power for Cost Saving: Reduce electric bills by adding solar to power mixers and vibrators.

7. Real Case Study – SSM Used Machine Setup in Multan

Name: Zubair Traders & Constructions
Model Used: SSM-24 Semi-Automatic (used for 2 years prior)
Setup Cost: PKR 4.2 Million
Daily Production: 11,000 Bricks
Monthly Profit: PKR 850,000
Payback Period: 5.5 Months
Comment: “Buying a used SSM machine was the best decision for our startup. Easy to run, low maintenance, and amazing support from the SSM team.”

8. Use on Business Websites

To target customers looking to start a profitable fly ash bricks business, include these SEO keywords in your content:

• Used fly ash bricks machine price in Pakistan
• Fly ash brick making machine profit
• Brick factory setup cost in Pakistan
• Used block machine business plan
• Low-cost brick manufacturing machine
• High return on investment brick business
• Second-hand SSM brick machine setup
• Profitable fly ash business in Punjab/Sindh
• Brick making machine ROI calculator Pakistan

Incorporating these phrases will help your site or product page rank on Google when people search for business ideas or equipment.

9. Conclusion

Investing in a used fly ash bricks machine in Pakistan, especially from a reputable brand like Silver Steel Mills (SSM), is a smart, high-return decision. With capital as low as 4 to 5 million rupees, you can generate monthly profits exceeding 7 to 8 lakh rupees.

Used SSM models like SSM 15, SSM 18, SSM 24, and SSM 35 are built to last, easy to maintain, and ideal for small to medium enterprises. Whether you’re starting from scratch or expanding an existing brick plant, these machines offer the best value for money and shortest payback time.

Factory Layout and Area Requirement for Used Fly Ash Brick Machine Setup in Pakistan

Setting up a successful used fly ash bricks machine in Pakistan business depends not only on machinery and raw materials but also on the proper layout of your factory and efficient use of space. A smartly designed layout ensures smooth workflow, safety, high productivity, and low operational delays.

Whether you are working with a used SSM 15, SSM 18, SSM 24, SSM 35, or even the SSM 50 model from Silver Steel Mills, the space you allocate and how you organize your setup will determine the long-term efficiency of your fly ash brick business.

Let’s walk through each step.

1. Minimum Area Required for Fly Ash Brick Plant

Here is a basic guide to the minimum land requirement based on machine size and output capacity:

If you’re buying a used fly ash bricks machine, the factory setup cost will be lower, and you can also use rented land initially to reduce capital burden.

2. Key Areas to Plan in Your Factory Layout

To ensure a smooth and logical workflow in your factory, divide your area into clearly defined zones:

A. Raw Material Storage Area

• Fly Ash, Cement, Sand, and Stone Dust must be stored in separate sheds.
• Use cement silos or covered bins to prevent moisture damage.
• Ideal space: 400–800 sq. ft.

B. Batching and Mixing Section

• Set up pan mixers, conveyor belts, and dosing systems.
• For used SSM machines, ensure compatibility with the older or upgraded mixing systems.
• Keep it close to raw material storage.
• Ideal space: 200–500 sq. ft.

C. Brick Forming Section

• This is where your used SSM fly ash brick machine will be installed.
• Include space for:
  • Vibration table
  • Hydraulic press
  • Mould area
• Allow forklift or trolley access for movement.
• Ideal space: 300–600 sq. ft.

D. Curing Yard

• Curing is essential for strength development.
• Create shaded or covered curing beds with water sprinkling or wet gunny bags.
• Can be semi-open; use plastic sheets or sheds during rainy season.
• Ideal space: 800–1,200 sq. ft.

E. Finished Goods Storage

• Allocate area for stacking dried and cured fly ash bricks.
• Organize in rows for easy counting and transport.
• Ideal space: 600–1,000 sq. ft.

F. Office & Utility Zone

• Small admin cabin (10×10 ft) for staff, computer, inventory records.
• Toilet and water supply for workers.
• Electric panel and control box setup area.
• Ideal space: 200–300 sq. ft.

3. Sample Layout Plan (For 1.5 Kanal Area)

pgsqlCopyEdit-----------------------------------------------------
| Raw Material Storage  |     Batching & Mixer      |
|-----------------------|---------------------------|
| Brick Machine Section |     Finished Bricks Yard  |
|-----------------------|---------------------------|
| Curing Beds           |     Office & Utilities    |
-----------------------------------------------------

This layout allows for a U-shape production flow:

1. Material moves from storage → mixer → machine → curing → finished area.
2. Minimizes labor movement and loading time.
3. Greatly improves productivity, especially for used machines that may have slightly longer cycle times.

4. Ground Surface and Drainage Tips

• Concrete flooring is ideal to avoid dust contamination and to support heavy machine weight.
• Ensure proper slope and drainage to avoid water pooling in the curing area.
• Set up rain shelters to protect your bricks during monsoon.

5. Power and Water Supply

• Your machine will need 3-phase electricity with stable voltage (minimum 25–50 kW depending on model).
• A backup generator is recommended, especially in rural areas.
• Ensure continuous water supply (approx. 500–1000 liters/day) for mixing and curing.

6. Space Saving Tips for Small Locations

• Use vertical stacking racks for finished bricks.
• Combine raw material bins into single compartments.
• Share curing and drying zones in shifts (AM/PM batches).
• Use mini silos or bags for cement if no space for bulk storage.

7. Compliance and Safety Requirements

• Leave minimum 3 feet of walking space around the machine.
• Add fencing around curing beds to avoid damage.
• Equip fire extinguishers and emergency shutdown switches near the electrical panel.
• Follow NEPRA and local building codes if operating in urban zones.

8. SEO Keywords to Include on Your Website or Blog

To target users looking for area plans, layout ideas, and used machine setups, include:

• Used fly ash brick machine setup in Pakistan
• Fly ash brick plant layout and space
• Factory area for used brick machine
• SSM fly ash machine setup guide
• Brick factory land requirement in Pakistan
• Cement brick machine layout plan
• Curing yard setup for fly ash bricks
• Fly ash brick manufacturing shed design

9. Conclusion

Setting up a used fly ash bricks machine business from Silver Steel Mills (SSM) doesn’t require a massive land investment. With as little as 10 Marla to 2 Kanal, you can launch a full-fledged production unit, depending on the machine model.

By organizing your space logically — from material storage to curing zones — and keeping the workflow efficient, you can boost output even from used or semi-automatic machines.